Gas Ball Valve PN40 

PROPERTIES

• FAF1400 PN 40 Natural Gas Ball Valve works by moving a perforated sphere with the size of the flow section through the control shaft in parallel or vertical position with the flow axis by turning a quarter turn (90 degrees) between the teflon bearings.
• Can be used in two ways.
• Stainless steel plate with spring reinforced teflon (PTFE) bearings provides 100% leakage at the lowest and highest pressures.
• The compatibility of Teflon material with a wide range of fluids and resistance to high temperatures allows it to be used in a wide range of applications.
• Sphere made of stainless steel, spheroidal cast iron.
 • Suitable for use in a fully open or fully closed position.
  • Pressure loss is close to zero since there is no contraction in the flow section in the open position.
• Can be controlled with low torque.
• Suitable for mounting gearbox and actuator.
It can be produced with heat shrinkable transition. (FAF 1450 - Reduction Transition PN40 Natural Gas Ball Valve)

SCOPE OF APPLICATION

Natural gas, Hot water, Steam, Acid and non-alkaline fluids, LPG

TEMPERATURE

+200 ° C

Gas Ball Valve PN40