Wafer Swing Check Valve FAF2300

PROPERTİES

The FAF2300 Wafer Type Swing Check Valve allows the fluid in the installation to proceed in the desired flow direction
flow when exposed to flow in the opposite direction
Stop.
• The disc hinged to the valve body is located in the flow section.
• With the fluid pressure at the start of the flow in the flow direction specified in the system, the disc rotates in the hinge axis, leaving the flow section and allowing flow.
• When the flow is stopped, the disc is positioned in the flow section thanks to the spring force and seals on the EPDM sealing gaskets placed on the body and provides 100% sealing. It is designed to minimize the pressure loss in the pipeline.
• Easy installation between the two flanges thanks to the short mounting length and the hook mounted on the body.
• The valve body can be manufactured from galvanized carbon steel (FAF2330) or stainless steel (FAF2300). The disc is made of 1.4301-AISI 304 stainless steel.
• Available in horizontal or vertical position
SCOPE OF APPLICATION

Steam, Hot Water, Cold Water, Acid and non-alkaline fluids, Compressed air

TEMPERATURE

+130 ° C

Wafer Swing Check Valve FAF2300